ftp自动上传工具它为网站的同步更新作了非常多的优化与定制，其独特的增量、断点上/下传送设计可以大大减轻您在设计网站后的同步问题，同时它，并结合IE具备了HTTP/FTP断点续传下载的功能，如此多才多艺，绝对不能错过!

iis7服务器管理工具适用群体为：机房管理、站长、运维工作、程序员，等需要大量服务器或者电脑的用户朋友。

IIS7服务器管理工具可以批量管理、定时上传下载、同步操作、数据备份、到期提醒、自动更新。IIS7服务器管理工具适用于Windows操作系统和liunx操作系统；支持Ftp客户端批量操作。

图片说明
需求：

将某一目录下，文件名为年月日的文件上传到ftp服务器

本地的/home/shell_test/data/ to ftp服务器上的/home/vsftpd/test/test1/####

!/bin/bash

DATE= $(date +%Y_%m_%d) filenames=`ls /home/shell_test/data/|sed -n '/[0-9]\{4\}_[0-9]\{2\}_[0-9]\{2\}/p'` OLD_IFS="$ IFS"
IFS=" "
arr=( $filenames) IFS="$ OLD_IFS"
for s in ${arr[@]} do ftp -n< open 10.20.31.222 user test 123456 binary cd /home/vsftpd/test/test1/ lcd /home/shell_test/data/ prompt put$ s
close
bye
!
done
安装ftp服务器:https://blog.csdn.net/qq_26941173/article/details/54575952

cat /etc/vsftpd/vsftpd.conf

Example config file /etc/vsftpd/vsftpd.conf

The default compiled in settings are fairly paranoid. This sample file

loosens things up a bit, to make the ftp daemon more usable.

Please see vsftpd.conf.5 for all compiled in defaults.

READ THIS: This example file is NOT an exhaustive list of vsftpd options.

Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's

capabilities.

Allow anonymous FTP? (Beware - allowed by default if you comment this out).

anonymous_enable=NO
#

Uncomment this to allow local users to log in.

When SELinux is enforcing check for SE bool ftp_home_dir

local_enable=YES
#

Uncomment this to enable any form of FTP write command.

write_enable=YES
#

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

local_umask=022
#

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access

anon_upload_enable=YES

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

anon_mkdir_write_enable=YES

Activate directory messages - messages given to remote users when they

go into a certain directory.

dirmessage_enable=YES
#

Activate logging of uploads/downloads.

xferlog_enable=YES
#

Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES
#

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

chown_uploads=YES

chown_username=whoever

You may override where the log file goes if you like. The default is shown

below.

xferlog_file=/var/log/xferlog

If you want, you can have your log file in standard ftpd xferlog format.

Note that the default log file location is /var/log/xferlog in this case.

xferlog_std_format=YES
#

You may change the default value for timing out an idle session.

idle_session_timeout=600

You may change the default value for timing out a data connection.

data_connection_timeout=120

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

nopriv_user=ftpsecure

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

async_abor_enable=YES

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that on some FTP servers, ASCII support allows a denial of service

attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd

predicted this attack and has always been safe, reporting the size of the

raw file.

ASCII mangling is a horrible feature of the protocol.

ascii_upload_enable=YES
ascii_download_enable=YES
#

ftpd_banner=Welcome to blah FTP service.

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

deny_email_enable=YES

(default follows)

banned_email_file=/etc/vsftpd/banned_emails

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

(Warning! chroot'ing can be very dangerous. If using chroot, make sure that

the user does not have write access to the top level directory within the

chroot)

chroot_local_user=YES
#chroot_list_enable=YES

(default follows)

chroot_list_file=/etc/vsftpd/chroot_list

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.

ls_recurse_enable=YES

When "listen" directive is enabled, vsftpd runs in standalone mode and

listens on IPv4 sockets. This directive cannot be used in conjunction

with the listen_ipv6 directive.

listen=NO
#

This directive enables listening on IPv6 sockets. By default, listening

on the IPv6 "any" address (::) will accept connections from both IPv6

and IPv4 clients. It is not necessary to listen on both IPv4 and IPv6

sockets. If you want that (perhaps because you want to listen on specific

addresses) then you must run two copies of vsftpd with two configuration

files.

Make sure, that one of the listen options is commented !!

listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
use_localtime=YES
listen_port=21
chroot_local_user=NO
idle_session_timeout=300
guest_enable=YES
guest_username=vsftpd
user_config_dir=/etc/vsftpd/vconf
data_connection_timeout=1
virtual_use_local_privs=YES
pasv_min_port=10060
pasv_max_port=10090
accept_timeout=5
connect_timeout=1
allow_writeable_chroot=YES
shell将字符串分隔成数组

!/bin/bash

a="hello,world,nice,to,meet,you"
#要将 $a分割开，先存储旧的分隔符 OLD_IFS="$ IFS"

设置分隔符

IFS=","

如下会自动分隔

arr=($a)

恢复原来的分隔符

IFS="$OLD_IFS"

遍历数组

for s in ${arr[@]} do echo "$ s"
done
变量 $IFS存储着分隔符，这里我们将其设为逗号 "," OLD_IFS用于备份默认的分隔符，使用完后将之恢复默认。 arr=($ a)用于将字符串 $a按IFS分隔符分割到数组$ arr ${arr[0]}$ {arr[1]} ... 分别存储分割后的数组第1 2 ... 项 ${arr[@]}存储整个数组。$ {!arr[@]}存储整个索引值：1 2 3 4 ...
${#arr[@]} 获取数组的长度。

ftp自动上传文件，shell脚本实现ftp自动上传文件

本地的/home/shell_test/data/ to ftp服务器上的/home/vsftpd/test/test1/####

!/bin/bash

Example config file /etc/vsftpd/vsftpd.conf

The default compiled in settings are fairly paranoid. This sample file

loosens things up a bit, to make the ftp daemon more usable.

Please see vsftpd.conf.5 for all compiled in defaults.

READ THIS: This example file is NOT an exhaustive list of vsftpd options.

Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's

capabilities.

Allow anonymous FTP? (Beware - allowed by default if you comment this out).

Uncomment this to allow local users to log in.

When SELinux is enforcing check for SE bool ftp_home_dir

Uncomment this to enable any form of FTP write command.

Default umask for local users is 077. You may wish to change this to 022,

if your users expect that (022 is used by most other ftpd's)

Uncomment this to allow the anonymous FTP user to upload files. This only

has an effect if the above global write enable is activated. Also, you will

obviously need to create a directory writable by the FTP user.

When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access

anon_upload_enable=YES

Uncomment this if you want the anonymous FTP user to be able to create

new directories.

anon_mkdir_write_enable=YES

Activate directory messages - messages given to remote users when they

go into a certain directory.

Activate logging of uploads/downloads.

Make sure PORT transfer connections originate from port 20 (ftp-data).

If you want, you can arrange for uploaded anonymous files to be owned by

a different user. Note! Using "root" for uploaded files is not

recommended!

chown_uploads=YES

chown_username=whoever

You may override where the log file goes if you like. The default is shown

below.

xferlog_file=/var/log/xferlog

If you want, you can have your log file in standard ftpd xferlog format.

Note that the default log file location is /var/log/xferlog in this case.

You may change the default value for timing out an idle session.

idle_session_timeout=600

You may change the default value for timing out a data connection.

data_connection_timeout=120

It is recommended that you define on your system a unique user which the

ftp server can use as a totally isolated and unprivileged user.

nopriv_user=ftpsecure

Enable this and the server will recognise asynchronous ABOR requests. Not

recommended for security (the code is non-trivial). Not enabling it,

however, may confuse older FTP clients.

async_abor_enable=YES

By default the server will pretend to allow ASCII mode but in fact ignore

the request. Turn on the below options to have the server actually do ASCII

mangling on files when in ASCII mode.

Beware that on some FTP servers, ASCII support allows a denial of service

attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd

predicted this attack and has always been safe, reporting the size of the

raw file.

ASCII mangling is a horrible feature of the protocol.

You may fully customise the login banner string:

ftpd_banner=Welcome to blah FTP service.

You may specify a file of disallowed anonymous e-mail addresses. Apparently

useful for combatting certain DoS attacks.

deny_email_enable=YES

(default follows)

banned_email_file=/etc/vsftpd/banned_emails

You may specify an explicit list of local users to chroot() to their home

directory. If chroot_local_user is YES, then this list becomes a list of

users to NOT chroot().

(Warning! chroot'ing can be very dangerous. If using chroot, make sure that

the user does not have write access to the top level directory within the

chroot)

(default follows)

chroot_list_file=/etc/vsftpd/chroot_list

You may activate the "-R" option to the builtin ls. This is disabled by

default to avoid remote users being able to cause excessive I/O on large

sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

the presence of the "-R" option, so there is a strong case for enabling it.

ls_recurse_enable=YES

When "listen" directive is enabled, vsftpd runs in standalone mode and

listens on IPv4 sockets. This directive cannot be used in conjunction

with the listen_ipv6 directive.